The cleaning of dirty machines, parts, moulds, etc. with glass granulate or sand is often difficult. Therefore, machines to be cleaned must be dismantled into individual parts. In addition, residues of the cleaning substrate usually remain on the surface, which must be removed. With a dry ice machine for cleaning you can clean surfaces without residues.
Different variants of a dry ice machine for cleaning
Dry ice machines for cleaning are offered as single-jet and twin-tube systems. When using a single hose system, the dry ice pellets are fed to the gun via the integrated dosing device using compressed air. For this purpose, the dosing device must be supplied with electrical power. This version of the dry ice machine for cleaning offers you the advantage that you can precisely dose the amount of dry ice pellets regardless of the pressure. You can adjust the pressure separately. Two-hose systems function according to the so-called Venturi principle. The dry ice pellets are combined with the compressed air in the gun. With this version it is not possible for you to precisely dose the amount of dry ice. The amount of dry ice pellets used for cleaning is determined by the blasting pressure. In addition, it is not uncommon for the blasting hose to be tight after a break, which can damage the hose.
It is therefore recommended that the hose of your dry ice machine for cleaning does not exceed a length of 14 metres. Otherwise there will be high pressure losses and optimum cleaning performance is no longer guaranteed. Standard hoses for your dry ice blasting machine can be ordered with lengths of 7 metres and 12 metres.
Areas of application of a dry ice machine for cleaning
The range of applications for a dry ice machine for cleaning is almost unlimited. If you own a varnishing or painting company or a print shop, use your dry ice machine for cleaning to remove stubborn ink residues from accessories and machines in no time at all, without having to use chemical cleaning agents and/or disassemble the machine. The removal of glaze from wooden surfaces as well as old dispersion paint walls is also possible without any problems. In the electrical engineering/electronics sector, dry ice machines for cleaning are used to clean electric motors, switch cabinets and circuit boards without the need for prior dismantling, as the dry ice pellets are not water but frozen carbon dioxide. An integrated grinder allows you to precisely dose the amount of dry ice.
If your company is in the street-m urban or commercial cleaning industry, you need a dry ice blasting machine to efficiently remove oil, grease, chewing gum, dirt, moss, graffiti and other contaminants without leaving any residue. With a dry ice machine for cleaning, hard-to-reach areas such as wells, subway shafts and escalators are easily accessible. Even listed buildings and sensitive surfaces, such as marble, can be cleaned with a dry ice jet without damage.
Further areas of application for a dry ice machine for cleaning
After a fire, you will achieve impressive results within a very short time when removing dirt and soot. With a dry ice machine you clean germ-killing and disinfecting. Therefore, you can also use your dry ice machine for cleaning in all areas of the food industry.
Cleaning Side 